4.2 Feature Number Table

4.2.1 Feature Number Table

The numbers listed below are the feature numbers used to access the PBX features. The numbering plan can be selected through system programming. Numbers in parentheses indicate that the feature numbers are different from those of "Plan 1" when "Plan 2" or "Plan 3" is selected.

Feature (While a dial tone is heard)

Numbering

Additional Number

1.2.1 Basic Calling

To call another extension (Intercom Call)

100–199
(100–499 or
10–49)^*1

To call the operator (Operator Call)

0/9

To select an idle outside (CO) line automatically (Automatic Line Access)

9/0^*2

outside phone no.

To select an idle outside (CO) line in the specified outside (CO) line group automatically (Outside (CO) Line Group Access)

outside (CO) line group no. (1–8) + outside phone no.

Using an Account Code (Account Code Entry)

/49
(

)

account code + outside phone no.

1.2.2 Easy Dialling

Using Numbers Stored at Your Extension (Personal Speed Dialling)

–

To store

personal speed dialling no. (0–9) + phone no. + #

–

To dial

/#
(1

/##)

personal speed dialling no. (0–9)

–	To confirm

personal speed dialling no. (0–9) + #

Using Numbers Stored in the PBX (System Speed Dialling)

–

To dial

system speed dialling no. (00–99)

Dialling a Preset Number by Going Off-hook (Hot Line)

–

To store

2 + phone no. + #

–

To set

1 + #/0

–

To cancel

0 + #/0

1.2.3 Redialling

Redialling the Last Outside Number You Dialled (Last Number Redial)

80/##
(80/###)

1.2.4 When the Dialled Party is Busy or There is No Answer

Leaving a Message Waiting Indication/Calling Back a Caller Who Left an Indication (Message Waiting)

Leaving a Message Waiting Indication

–

To leave

1 + extension no. + #/0

–

To cancel

2 + extension no. + #/0

Calling Back a Caller Who Left an Indication

–	To cancel all indications left at your extension

0 + #/0

–	To cancel all indications left at another extension

3 + extension no. + #

–	To lock indications left at your extension

4-digit (4000–9999) lock code 2 times + #/0

–	To unlock indications left at your extension

stored lock code + #/0

1.2.6 Using Your Calling Privileges at Another Extension (Walking COS)

extension password + your extension no. + #/0

1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup)

Answering a Call from Another Telephone (Call Pickup)

–	Group Call Pickup

40
(#40)

–	Directed Call Pickup

4
(#41)

extension no.

Preventing Other People from Picking Up Your Calls (Call Pickup Deny)

–	To prevent

1 + #/0

–

To allow

0 + #/0

1.4.2 Holding a Call

To retrieve a call (Call Hold Retrieve)

–	To retrieve an outside (CO) line call

53
(#59)

no. (1–8) of outside (CO) line being held

–	To retrieve an intercom call

5
(#5)

extension no. that put the call on hold

Holding in a System Parking Zone (Call Park)

–	To park a call

22
(#22)^*3

parking zone no. (0–9)

–	To retrieve

52
(#56)^*4

stored parking zone no. (0–9)

1.4.4 Answering Call Waiting

Answering Call Waiting from the Telephone Company

1.4.5 Talking to Multiple Parties (Conference)

Originating a 3-party to 5-party Conference Call (5-party Conference)

(#22

)

(phone no. + CONF) 4 times + CONF

1.5.1 Forwarding Your Calls (Call Forwarding [FWD]) /1.7.2 Refusing Incoming Calls (Do Not Disturb [DND])

0 (Cancel) + #/0

1 (All Calls) + extension no. + #/0

2 (Busy/No Answer) + extension no. + #/0

3 (To Outside (CO) Line) + outside (CO) line access no. + outside phone no. + #

4 (Do Not Disturb [DND]) + #/0

5 (Follow Me) + your extension no. + #/0

8 (Follow Me Cancel) + your extension no. + #/0

1.5.2 Showing a Message on the Caller's Telephone Display (Absent Message)

–

To set

1–6 (+ parameter) + #/0

–

To cancel

0 + #/0

1.5.3 Preventing Other People from Using Your Telephone (Extension Lock)

–

To lock

4-digit lock code 2 times + #/0

–

To unlock

stored lock code + #/0

1.5.4 Leaving a Group (Log-in/Log-out)

736

–

To log in

0 + #/0

–	To log out

1 + #/0

1.5.5 Using Voice Messaging (Built-in Voice Message [BV])

Recording, Playing, or Erasing Personal BV Outgoing Messages

723

–

To record

1 + #/0

–	To play back

2 + #/0

–

To erase

0 + #/0

Forwarding Your Calls to Built-in Voice Message

–

To set

1 (All Calls) or 2 (Busy/No Answer) + 725 + #/0

–

To cancel

0 (Cancel) + #/0

Leaving, Playing, or Erasing Voice Messages

725

–	To leave a voice message using Direct Message

1 + extension no. + #/0

–	To play back all voice messages in a voice message area

2 + #/0

–	To erase all voice messages in a voice message area

0 + #/0

1.6.1 Paging

–	All Extensions

33
(#33)

–

Group

33
(#33)

extension group no. (1–8)

–

External

34
(#34)

–	All Extensions & External

33
(#33)

or 9

1.6.2 Answering/Denying a Paging Announcement

–

To answer

43
(#43)

–

To refuse

734

1 + #

–

To accept

734

0 + #

1.7.1 Setting the Alarm (Timed Reminder)

–

To set

hour/minute + 0 (AM)/1 (PM) + 1 (one time)/2 (daily) + #/0

–

To cancel

2 + #/0

–	To confirm

3 + #

1.7.3 Receiving Call Waiting

–	To set for outside (CO) line calls

731

1 + #/0

–	To cancel for outside (CO) line calls

731

0 + #/0

–	To set for intercom calls/doorphone calls

732

1 + #/0

–	To cancel for intercom calls/doorphone calls

732

0 + #/0

1.7.4 Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)

733

–	To prevent

0 + #/0

–

To allow

1 + #/0

1.7.6 Protecting Your Line against Notification Tones (Data Line Security)

730

–

To set

1 + #/0

–

To cancel

0 + #/0

1.7.8 Clearing Features Set at Your Extension (Extension Feature Clear)

#/0

1.7.9 Monitoring a Room (Room Monitor)

735

–

To set

1 + #

–

To cancel

0 + #

–	To monitor through a doorphone

31
(#31)

doorphone no. (1–4)

1.8.1 If a Doorphone/Door Opener is Connected

Calling to and from a Doorphone (Doorphone Call)

31
(#31)

doorphone no. (1–4)

Opening a Door (Door Open)

55
(#55)

door opener no. (1–4)

1.8.2 If a Host PBX is Connected

Accessing External Services (External Feature Access [EFA])

1.8.3 If a Voice Processing System is Connected

Forwarding Your Calls to a Voice Processing System (Voice Mail Integration)

–

To set

1 (All Calls) or 2 (Busy/No Answer) + voice mail extension no. + #/0

–

To cancel

0 (Cancel) + #/0

–	To listen to messages

784

#/0

Screening Calls (Live Call Screening [LCS])

–	To set the LCS password

3-digit LCS password 2 times + #

–	To cancel the LCS password

stored LCS password + #

1.9.1 Calling with the Incoming Call Log

–	To erase all caller information in the personal area

–	To disregard the newest call in the personal area

737

0 + #

–	To overwrite the oldest call in the personal area

737

1 + #

–	To set logging of caller information when answering a call

738

1 (Personal area) or 2 (Common area) + #/0

–	To cancel logging of caller information when answering a call

738

0 (Cancel) + #/0

2.1.2 Switching the Time Service Mode (Time Service)^*5

–	To set (Day/Night/Lunch)

(1/2/3) + #

–

To cancel

0 + #

2.1.3 Setting an Alarm for Other Extensions (Remote Timed Reminder [Wake-up Call])^*5

764

–

To set

extension no. + # + 76 + hour/minute + 0 (AM)/1 (PM) + 1 (one time)/2 (daily) + #

–

To cancel

extension no. + # + 76 + 2 + #

–	To confirm

extension no. + # + 76 + 3 + #

2.1.4 Erasing All Caller Information in the Common Area (Incoming Call Log in the Common Area—CLEAR ALL)^*5

–

To erase

2.1.5 Disregarding the Newest Call or Overwriting the Oldest Call in the Common Area Call Log (301st Incoming Call Logged in the Common Area)^*5

737

–	To disregard the newest call

2 + #

–	To overwrite the oldest call

3 + #

2.1.6 Recording, Playing, or Erasing Common BV Outgoing Messages^*5

722

–

To record

common BV outgoing message (OGM) no. (01–24) + 1 + #/0

–	To play back

common BV OGM no. (01–24) + 2 + #/0

–

To erase

common BV OGM no. (01–24) + 0 + #/0

•	*¹ For United Kingdom/New Zealand: Plan 1: 200–299; for New Zealand: Plan 2: 200–499, Plan 3: 20–49
•	*² For New Zealand: 1 or 9
•	*³ For United Kingdom/New Zealand: Plan 1: 36; Plan 2/Plan 3: #36
•	*⁴ For United Kingdom/New Zealand: Plan 1: 56; Plan 2/Plan 3: #56
•	*⁵ This feature is only available for the operator/manager.

Feature (While a busy tone or DND tone is heard)

Numbering

1.2.4 When the Dialled Party is Busy or There is No Answer

Sending a Call Waiting Tone to a Busy Extension (Busy Station Signalling [BSS]) /

Calling an Extension That Is Refusing Calls (DND Override)

Joining an Existing Call (Executive Busy Override)

Reserving a Busy Line (Automatic Callback Busy [Camp-on])

Feature (While dialling or talking)

Numbering

1.2.5 Switching the Calling Method (Alternate Calling—Ring/Voice)

1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup)

–	Call Retrieving from a Telephone Answering Machine (TAM)

1.4.9 Changing the Dialling Mode (Pulse to Tone Conversion)

1.4.5 Talking to Multiple Parties (Conference)

Adding a Third Party During a Conversation (3-party Conference)

3
(#3)

1.8.1 If a Doorphone/Door Opener is Connected

From an extension that is on a call with a doorphone

•	* Dial after dialling the TAM's extension number and hearing a busy tone.

Feature (When the extension is on-hook)

Numbering

1.7.5 Turning on the Background Music (BGM)

–	To set/cancel

1.7.7 Checking the Time Service Mode/2.1.2 Switching the Time Service Mode (Time Service)

–	To confirm the current mode

3.1.2 Changing Personal Settings Using Programming Mode

Confirming Your Own Extension Number (Self-extension Number Confirmation)

–	To switch the display between "date (month [day], day [month]) and time", "date (month [day], day [month], year, day of the week)", and "extension number (and extension name if stored)"