| Built-in Voice Message (BV) (Optional voice message card required) Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message area or the PBX's common message area. |
Fixed Line SMS Terminal Support (Optional Caller ID card required) The PBX can relay incoming calls from a Short Message Service (SMS) centre to specific single line telephones (SLTs) that support SMS. Fixed Line SMS is a service that allows text messages to be sent and received via Public Switched Telephone Network (PSTN) access. We recommend using SMS-enabled Panasonic SLTs. |
Caller ID Display on SLT (Optional Caller ID card required) The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on outside (CO) lines. This information can be shown on the displays of SLTs that support Caller ID as well as proprietary telephones (PTs) when receiving calls. |
3-level Automated Attendant (AA) 3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward System Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages (OGMs), and be connected to the desired party automatically. |
PC Programming System programming settings can be accessed using a PC and the Panasonic KX-TE Maintenance Console software as well as by using a PT. The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the KX-TE Maintenance Console software. |
Quick Setup Basic PBX parameters such as Automatic Configuration for Outside (CO) Line Type, Country Setting can be programmed the first time the PBX is accessed with a PC using the KX-TE Maintenance Console software. |
Advanced Hybrid System This PBX supports the connection of PTs, Direct Station Selection (DSS) Consoles and single line devices such as SLTs, fax machines, wireless telephones and data terminals. |