4.2 Tones/Ring Tones

4.2.1 Tones/Ring Tones

Tone Patterns

Dial Tone 1

Normal
imu5135a.gif

Dial Tone 2

Any of the following features is set:
• Absent Message
• Background Music (BGM) (proprietary telephone [PT] only)
• Call Forwarding (FWD)
• Call Pickup Deny
• Data Line Security
• Do Not Disturb (DND)
• Extension Lock
• Hot Line (single line telephone [SLT] only)
• Message Waiting (PT only)
• Remote Extension Lock
• Timed Reminder
imu5140a.gif

[Czech Republic only]
imu5290a.gif

Dial Tone 3

• When going off-hook with an SLT that has messages waiting
• When Account Code Entry is performed
• When answering a call from Timed Reminder
imu5145a.gif

Dial Tone 4

A new voice message has been recorded (Built-in Voice Message [BV]).
imu5150a.gif

Dial Tone 5

The remaining voice message recording time is less than 5 minutes or 125 voice messages have been recorded (Built-in Voice Message [BV]).
imu5146a.gif

Busy Tones

imu5155a.gif

[Australia/New Zealand only]
imu5275a.gif

[Czech Republic only]
imu5280a.gif

Reorder Tones

The outside (CO) line you tried to seize is not assigned or was denied.
imu5160a.gif

[Czech Republic only]
imu5285a.gif

Ringback Tones

Single (3-s interval)
imu5165a.gif
Double (3-s interval)
imu5180a.gif
Single (5-s interval)
imu5185a.gif
Double (5-s interval)
imu5121a.gif

DND Tone

The dialled extension is refusing incoming calls.
imu5170a.gif

Call Waiting Tone 1
imu5175a.gif

Call Waiting Tone 2

Single
imu5115a.gif
Double
imu5120a.gif
Triple
imu5125b.gif

Hold Alarm Tone

A call has been on hold for longer than the specified time.
imu5190a.gif

Warning Tone (Outside (CO) Line Call Limitation)

This tone is sent 15 seconds before the specified time for disconnection.
imu5195a.gif

Confirmation Tone 1

The feature was set successfully, or the Extension Lock feature was set or cancelled.
imu5200a.gif

Confirmation Tone 2

The new feature setting was the same as the previous setting, or certain features were successfully performed or accessed (e.g., Call Hold, Automatic Callback Busy).
imu5205a.gif

Confirmation Tone 3

Before the following features activate:
• Retrieving a held call
• Picking up another call
• Establishing a conference call
• Paging/Answering a paging announcement
imu5210a.gif

Ring Tone Patterns

Ring Tone Patterns

The following ring tone patterns can be assigned to incoming call types (outside (CO) line, intercom, or doorphone calls), or are fixed for certain call types (Hold Recall, Timed Reminder, or Camp-on Recall).
 
Single
(Incoming calls/Hold Recall [outside (CO) line calls])
imu5115a.gif
Double
(Incoming calls/Hold Recall [intercom calls])
imu5120a.gif
Triple
(Incoming calls/Timed Reminder)
imu5125a.gif
S-Double
(Incoming calls [doorphone calls only]/Camp-on Recall)
imu5130a.gif

Ring Tone Patterns Sent from the Telephone Company (New Zealand only)

The following ring tone patterns sent from the telephone company can be detected for each outside (CO) line.
 
Pattern 1
imu5215a.gif
Pattern 2
imu5220a.gif
Pattern 3
imu5225a.gif
Pattern 4
imu5230a.gif

Doorphone Chime Patterns

The following doorphone chime patterns can be assigned to each doorphone when doorbells and door chimes are connected to the PBX.
 
Pattern 1*
imu5235a.gif
Pattern 2*
imu5240a.gif
Pattern 3*
imu5245a.gif
Pattern 4*
imu5250a.gif
Pattern 5
imu5255a.gif
Pattern 6
imu5260a.gif
Pattern 7
imu5265a.gif
Pattern 8
imu5270a.gif
* Chime patterns 1 to 4 are played only one time during the doorphone ringing time.