While On-hook

Ring Tone Patterns

The following ring tone patterns can be assigned to incoming call types (outside (CO) line, intercom, or doorphone calls), or are fixed for certain call types (Hold Recall, Timed Reminder, or Camp-on Recall).

Single
(Incoming calls/Hold Recall [outside (CO) line calls])

Double
(Incoming calls/Hold Recall [intercom calls])

Triple
(Incoming calls/Timed Reminder)

S-Double
(Incoming calls [doorphone calls only]/Camp-on Recall)

Ring Tone Patterns Sent from the Telephone Company (New Zealand only)

The following ring tone patterns sent from the telephone company can be detected for each outside (CO) line.

Pattern 1

Pattern 2

Pattern 3

Pattern 4

Doorphone Chime Patterns

The following doorphone chime patterns can be assigned to each doorphone when doorbells and door chimes are connected to the PBX.

Pattern 1*

Pattern 2*

Pattern 3*

Pattern 4*

Pattern 5

Pattern 6

Pattern 7

Pattern 8

* Chime patterns 1 to 4 are played only one time during the doorphone ringing time.

When Going Off-hook

Dial Tones

Tone 1

Normal

Tone 2

Any of the following features is set:

•	Absent Message
•	Background Music (BGM) (proprietary telephone [PT] only)
•	Call Forwarding (FWD)
•	Call Pickup Deny
•	Data Line Security
•	Do Not Disturb (DND)
•	Extension Lock
•	Hot Line (single line telephone [SLT] only)
•	Message Waiting (PT only)
•	Remote Extension Lock
•	Timed Reminder

[Czech Republic only]

Tone 3

•	When going off-hook with an SLT that has messages waiting
•	When Account Code Entry is performed
•	When answering a call from Timed Reminder

Tone 4

A new voice message has been recorded (Built-in Voice Message [BV]).

Tone 5

The remaining voice message recording time is less than 5 minutes or 125 voice messages have been recorded (Built-in Voice Message [BV]).

When Making Calls

Busy Tones

[Australia/New Zealand only]

[Czech Republic only]

Reorder Tones

The outside (CO) line you tried to seize is not assigned or was denied.

[Czech Republic only]

Ringback Tones

Single (3-s interval)

Double (3-s interval)

Single (5-s interval)

Double (5-s interval)

DND Tone

The dialled extension is refusing incoming calls.

While Off-hook

Indication Tones

Tone 1 (Call Waiting Tone)

Tone 2 (Call Waiting Tone)

Single

Double

Triple

Tone 3 (Hold Alarm Tone)

A call has been on hold for longer than the specified time.

When Talking to an Outside Party

Warning Tone

This tone is sent 15 seconds before the specified time for disconnection.

When Setting the Features or Programming

Confirmation Tones

Tone 1

The feature was set successfully, or the Extension Lock feature was set or cancelled.

Tone 2

The new feature setting was the same as the previous setting, or certain features were successfully performed or accessed (e.g., Call Hold, Automatic Callback Busy).

Tone 3

Before the following features activate:

•	Retrieving a held call
•	Picking up another call
•	Establishing a conference call
•	Paging/Answering a paging announcement