System Requirements

Operating System

• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP

Hardware

• CPU: 300 MHz Intel Celeron or faster • RAM: At least 128 megabytes (MB) of available RAM • Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of additional space for user files.

Setting the Password and Password Security

To maintain system security, a password is required to perform system programming. When KX-TE Maintenance Console is started for the first time, the Quick Setup utility will ask you to set the system password. To avoid unauthorised access and possible fraudulent dialling, do not disclose the password.

Warning to the Installer regarding the system password

1. Please inform the customer of the importance of the password and the possible dangers if it becomes known to others. 2. To avoid unauthorised access and possible fraudulent dialling, maintain the secrecy of the password. 3. We strongly recommend that you change the default password value to something else for reasons of system security. It is best to use a password of 7 digits. 4. Please change the password periodically. 5. If a system password is forgotten, it can be found by loading a backup of the system data into a PC, and checking the password using the KX-TE Maintenance Console software. If you do not have a backup of the system data, you must reset the PBX to its factory defaults and reprogramme it. Therefore, we strongly recommend maintaining a backup of the system data. For more information on how to back up the system data, refer to the on-line help that appears by selecting the Help menu during PC programming. However, as system passwords can be extracted from backup copies of the system data file, do not allow unauthorised access to these files.

Note

This PBX has only one system password. It can be changed by either PT programming or PC programming. For this reason, the password can consist of numerals only.

Installing KX-TE Maintenance Console

Notes

	•	Before installing or uninstalling the software, be sure to close any open applications.
	•	To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user in the "Administrators" group.
	•	The screenshots shown here are for reference only, and may differ from the screens displayed on your PC.

	1.	Insert the included CD-ROM into the CD-ROM drive of your PC. The main screen will appear automatically.
	2.	Click Maintenance Console.
	3.	Double-click the setup file to run the installer. (Its icon is shown here, on the left.)
	4.	Follow the on-screen instructions provided by the installation wizard.
	5.	Select the appropriate model code. (The model code is the suffix attached to the model number.) The appropriate default data will be installed based on the model code selected here.
	6.	Click Next.
	7.	Follow the instructions of the wizard.